44 lines
3.5 KiB
Plaintext
44 lines
3.5 KiB
Plaintext
|
#### crowsnest.conf
|
||
|
#### This is a typical default config.
|
||
|
#### Also used as default in mainsail / MainsailOS
|
||
|
#### See:
|
||
|
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
|
||
|
#### for details to configure to your needs.
|
||
|
|
||
|
|
||
|
#####################################################################
|
||
|
#### #####
|
||
|
#### Information about ports and according URL's #####
|
||
|
#### #####
|
||
|
#####################################################################
|
||
|
#### #####
|
||
|
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
|
||
|
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
|
||
|
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
|
||
|
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
|
||
|
#### #####
|
||
|
#####################################################################
|
||
|
#### RTSP Stream URL: ( if enabled and supported ) #####
|
||
|
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
|
||
|
#####################################################################
|
||
|
|
||
|
|
||
|
[crowsnest]
|
||
|
log_path: /home/pi/printer_data/logs/crowsnest.log
|
||
|
log_level: verbose # Valid Options are quiet/verbose/debug
|
||
|
delete_log: false # Deletes log on every restart, if set to true
|
||
|
no_proxy: false
|
||
|
|
||
|
[cam 1]
|
||
|
mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices)
|
||
|
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
|
||
|
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
|
||
|
rtsp_port: 8554 # Set different ports for each device!
|
||
|
port: 8080 # HTTP/MJPG Stream/Snapshot Port
|
||
|
device: /dev/video0 # See Log for available ...
|
||
|
resolution: 1920x1080 # widthxheight format
|
||
|
max_fps: 15 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
|
||
|
custom_flags: --camera-path=/base/soc/i2c0mux/i2c@1/ov5647@36 --camera-type=libcamera --camera-format=H264 --camera-nbufs=3 --camera-fps=30 --camera-allow_dma=1 --camera-high_res_factor=0.500000 --camera-low_res_factor=0.500000 --camera-auto_reconnect=0 --camera-auto_focus=1 --camera-vflip=0 --camera-hflip=0 --camera-snapshot.options=compression_quality=100 --camera-snapshot.height=0 --camera-stream.disabled=0 --camera-stream.options=compression_quality=100 --camera-stream.height=0 --camera-stream.disabled=0 --camera-stream.options=video_bitrate_mode=0 --camera-stream.options=repeat_sequence_header=5000000 --camera-stream.options=h264_i_frame_period=30 --camera-stream.options=h264_level=11 --camera-stream.options=h264_profile=4 --camera-stream.options=Sharpness=0.0 --camera-stream.options=ExposureValue=0 --camera-stream.options=h264_minimum_qp_value=51 --camera-stream.options=h264_maximum_qp_value=51 --camera-stream.options=video_bitrate=25000000 --camera-stream.options=video_bitrate_mode=0 --camera-stream.options=AeExposureMode=2 --camera-stream.options=ScalerCrop=0 --camera-list_options=0
|
||
|
# You can run the Stream Services with custom flags.
|
||
|
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
|